Oneplus 4lan • 1 day ago • 75%

I'm pretty impressed with the AI eraser! Really helping clean up strangers from pics I took in Austin It seems I've been sleeping on this feature! If you don't see it in your photo editor enable AI under settings > system & update > system services > ai service engine

3DPrinting 4lan • 1 week ago • 96%

I've been playing some gyroscope based racing games on my phone and thought it would be cool to have a physical steering wheel to hold. Since I already have a magsafe ring stuck to the back of my OnePlus Open I designed it to use magnets. Functionally it makes the games way easier to play since you can really precisely tilt the phone. You can even steer one-handed pretty easily too The magnets I used are a little weak so I'll be replacing that with another stronger magnet ring I have Designed in fusion 360, printed in pla+ on K1max

3DPrinting 4lan • 3 weeks ago • 98%

I was experimenting with bottom patterns in Orca and octagon spiral looked cool. I tried it with RGB filament and it came out amazing! There is a depth to it and it changes with the angle I haven't seen this before online so figured I'd share!

Trees 4lan • 3 weeks ago • 100%

I've been growing this same phenotype of sugar cane for a year and a half now. I just can't give it up! It's a complete frost monster and a pretty good producer. The last plant was over a half pound! Just about 1g per watt! Grown in 5 gallon DWC hydro Might be moving to a Prohibition State soon :( I'm hoping one of my neighbors will keep this pheno alive!

Android 4lan • 4 weeks ago • 100%

I am finally back to having a rooted phone after a decade! Feels nice to have control over my phone again. The only thing left to get working again for me is the Samsung Wear connection to my Watch6. I can get pretty far in the setup, but it eventually says it can't connect. I tried the Magisk module GoogleSpoofForWear and even edited my .prop file, no luck! Safetynet passes and playintegrity is intact. Followed every guide I could find, so reaching out to you guys for help! anyone get their watch working on a rooted phone? (android 14) Edit "Solution": I was able to get it to work after fully resetting my watch. I kept the app magisk hidden but not sure if it was necessary... I didn't want to have to do that but at least it works now!

3DPrinting 4lan • 1 month ago • 98%

I made a magsafe mount in black for my Kia and I didn't like the layer lines on the curved parts, but it gave me the idea to try using wood I have a 3D Chameleon MMU so I added color changes randomly throughout between two shades of brown. One is wood, one is PLA. It honestly came out way better than I even expected! If anyone wants the STL I can provide it!

Oneplus 4lan • 1 month ago • 63%

I was curious if the new pixel fold would catch my attention but it looks like it is still not as good as the open. The bezels are way too big for 2024, and the curved corners are really drastic. They also didn't upgrade the camera, so the telephoto is still stuck at 5x 10mp.... I guess the OPO is king in the US for another year?

Oneplus 4lan • 1 month ago • 90%

I decided to try out GCam and it seems to be better in certain scenarios, specifically low light. The stock camera app is better with dynamic range in bright scenes. These were taken with the v8.8 GCam

Oneplus 4lan • 2 months ago • 60%

I've been waiting for someone to make this comparison video, looks like I made the right choice picking the open

Oneplus 4lan • 2 months ago • 85%

It seems it will be like the black one, with faux leather, except red. The side rails appear to be glossy metal instead of the matte of the black one. It's all rumors right now but some are suggesting it may have more RAM and storage. I think we already have overkill RAM, but I could see people wanting one terabyte. I still prefer the black, but cool to have another option now while we wait for the Open 2 Update: it is 16GB RAM and 1TB storage, great choice IMO

Oneplus 4lan • 2 months ago • 85%

I've been trying to play games while watching a video at the same time and it seems like no matter what I do fortnite shows up stretched. Even if I open a different app and split screen and then switch to it, fortnite appears to open in the right ratio but then when it loads it is all stretched (menu and gameplay) Any way to fix this? Stuff like this was so easy on my galaxy fold there is a huge learning curve with the open.

Got ambitious with my new multicolor setup (3D Chameleon) I had some issues toward the end, in the blue parts, but otherwise it's perfectly functional and strong! Going to do the same treatment for the upper and handguard to make it a full on USA flag :) STLs upon request

cross-posted from: https://lemmy.world/post/12330194 > cross-posted from: https://lemmy.world/post/12330141 > > > cross-posted from: https://lemmy.world/post/12330066 > > > > > I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone. > > > > > > I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device! > > > > > > Speakers, USB and pen are all accessible still. > > > > > > I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks. Also selling printed cases for those without a printer! > > ([Frogcase](https://frogcase.store/products/samsung-galaxy-s23-ultra-junglecat-controller-case))

Samsung 4lan • 7 months ago • 72%

cross-posted from: https://lemmy.world/post/12330141 > cross-posted from: https://lemmy.world/post/12330066 > > > I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone. > > > > I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device! > > > > Speakers, USB and pen are all accessible still. > > > > I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks. Also selling printed cases for those without a printer! > ([Frogcase](https://frogcase.store/products/samsung-galaxy-s23-ultra-junglecat-controller-case))

Samsung Galaxy S23 Ultra 4lan • 7 months ago • 80%

cross-posted from: https://lemmy.world/post/12330066 > I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone. > > I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device! > > Speakers, USB and pen are all accessible still. > > I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks. Also selling printed cases for those without a printer! ([Frogcase](https://frogcase.store/products/samsung-galaxy-s23-ultra-junglecat-controller-case))

3DPrinting 4lan • 7 months ago • 92%

I had made Junglecat controller cases for my galaxy fold but just got a S23 Ultra and decided to make another for this phone. I love how perfectly the size of the controllers matches the phone width. It makes it look like one cohesive device! Speakers, USB and pen are all accessible still. I am willing to share the STL for free to anyone interested, but if you want to leave me a 'tip' you can buy the file from my store for five bucks ([Frogcase](https://frogcase.store/products/samsung-galaxy-s23-ultra-junglecat-controller-case))

3DPrinting 4lan • 7 months ago • 95%

I finally got multi-color working on my Creality K1 Max using the [3D Chameleon](http://www.3dchameleon.com). Decided to make a 2 color benchy and scaled it down to 75% to save time, along with 0.25mm layer height. So far the Chameleon has been pretty picky with filament, but when it works it works well! This print is with silk gold and matte black. I have even gotten 95A TPU to print with it surprisingly! I modified the color-change code so it takes 1 minute less, which makes a big difference when you have hundreds of color changes. Next up, 4 color benchy. Probably will be 10 hrs lol

3DPrinting 4lan • 8 months ago • 84%

I know this is very specific to my devices, but thought I'd share anyways. Really happy with how this came out and how convenient it is. I have been playing with this idea for a while and finally designed it. This charges my ZFold3, Galaxy Watch6 and XROS vape all at the same time on my nightstand. Phone and watch chargers are wireless, vape charger is a cable inserted to make a 'dock'. I designed slots in the bottom so the cables all route out the back. I added a little area at the front for miscellaneous items, like lip balm and coins. I'm kicking myself now for not including a place to put my glasses, but I might design something to attach to this existing dock for them to go. [without phone/watch/vape](https://imgur.com/a/8toEpFK) [underside](https://imgur.com/a/5fuM6TY)

3DPrinting 4lan • 8 months ago • 84%

I ended up doing some experimenting to see how low I can make the fans go without sacrificing print quality and came up with this profile that is significantly quieter. It prints a 22min flawless benchy despite lower fan speeds. Thought I'd share it in case anyone else wants to use it I have been putting my K1 Max in my laundry room due to the jet-engine/vacuum cleaner sounds it makes when printing. I got annoyed having to move it when doing a load, so decided to try to quiet it down a bit so I can have it nearby in my office. I used butyl sound dampening sheets on the side panels, but that only helped with vibration noise from the side fans. It helps, but not enough. - Speed: 300 mm/s - Acceleration: 12,000 mm/s² - Max Fan: 40% - Chamber Fan: Off - Side Fan: 20% **Important:** One thing to keep in mind is that if your minimum layer time (in cooling section) is too low your fans will run at 100% when your layers are less than this time, despite what you have fans set at in the profile. If you are printing a smaller model you might get some periods of high fan speed. Just adjust the min layer time for these instances. I have it set to 2 seconds, but 5 should be better for very small prints Profile Download: https://drive.google.com/file/d/1o_MRKWpwETTULHfVH4gRRadcLowg9RR5/view?usp=sharing-

cross-posted from: https://lemmy.world/post/9717440 > I just had to share this with you guys. > I'm finally growing shit better than I could buy at the dispensary for $500/ounce. > > SugarCane by In-House (Slurricane X Platinum) > > Smells like glue and berries, strong smell of hash. > > Grown in 5gal DWC with Lotus nutes, CalMag, Si, Fish Shit, and Orca. > > Only got an ounce from this plant, but I don't even care because of the quality. got clones of her so I'll be stocked all winter and spring with this glorious strain. > > Here is how it looked in week 6: https://lemmy.world/post/9264237

Trees 4lan • 9 months ago • 91%

I just had to share this with you guys. I'm finally growing shit better than I could buy at the dispensary for $500/ounce. SugarCane by In-House (Slurricane X Platinum) Smells like glue and berries, strong smell of hash. Grown in 5gal DWC with Lotus nutes, CalMag, Si, Fish Shit, and Orca. Only got an ounce from this plant, but I don't even care because of the quality. got clones of her so I'll be stocked all winter and spring with this glorious strain. Here is how it looked in week 6: https://lemmy.world/post/9264237

cross-posted from: https://lemmy.world/post/9323891 > Here is the other side: https://imgur.com/a/DQQooDk > > **Gushing about CoreXY:** > > I finally got around to upgrading to a klipper based core xy machine and it is **magic** > I went for the K1 Max, since it was $680 after discounts and it's 300mm^3^ (1.5X the size of a X1C) > > Accelerations are 10x faster, print times are 4x shorter compared to my highly modded ender3 and cr-10. this build took about 12hr of print time, normally it was 2 full days. > > NO sanding, NO filing, NO heating things up to make them fit right. > > Every single piece came off the build-plate perfectly ready to go, aside from my intentionally under-sized pivot and takedown pin holes. I like to drill those out personally... > > **Now for the specifications:** > > - Daichi Upper + shroud (modified) > - DS1913 Lower v1.2 (modified) > - Slim Everytown mag (modified) > - Get Bent angled grip > - Mini hand stop > - sling mount is just the mount from SG22 brace > - Sling is a laptop bag strap 😆 > - The muzzle device is an AKM compensator I modified to work for AR barrels. It works marvelously to prevent muzzle climb. Check the video how the gas is going up and forward. > - The binary is the mythical Invisibinary by Klaviermeister. It was taken down years ago but if you have half a brain you can find it still. Fosscad of reddit keeps making posts begging for the files every few months lol. they all give up and pay $400 for a storebought binary. > > Wondering about reliability? I have thousands of rounds through this binary trigger. check out this clip of a mag dump at 600RPM: https://imgur.com/a/khxhymP > > this firearm is for self-defense only. The quote is from >  **___**

Here is the other side: https://imgur.com/a/DQQooDk **Gushing about CoreXY:** I finally got around to upgrading to a klipper based core xy machine and it is **magic** I went for the K1 Max, since it was $680 after discounts and it's 300mm^3^ (1.5X the size of a X1C) Accelerations are 10x faster, print times are 4x shorter compared to my highly modded ender3 and cr-10. this build took about 12hr of print time, normally it was 2 full days. NO sanding, NO filing, NO heating things up to make them fit right. Every single piece came off the build-plate perfectly ready to go, aside from my intentionally under-sized pivot and takedown pin holes. I like to drill those out personally... **Now for the specifications:** - Daichi Upper + shroud (modified) - DS1913 Lower v1.2 (modified) - Slim Everytown mag (modified) - Get Bent angled grip - Mini hand stop - sling mount is just the mount from SG22 brace - Sling is a laptop bag strap 😆 - The muzzle device is an AKM compensator I modified to work for AR barrels. It works marvelously to prevent muzzle climb. Check the video how the gas is going up and forward. - The binary is the mythical Invisibinary by Klaviermeister. It was taken down years ago but if you have half a brain you can find it still. Fosscad of reddit keeps making posts begging for the files every few months lol. they all give up and pay $400 for a storebought binary. Wondering about reliability? I have thousands of rounds through this binary trigger. check out this clip of a mag dump at 600RPM: https://imgur.com/a/khxhymP this firearm is for self-defense only. The quote is from  **___**

I have finally been pheno hunting small packs (5-6) of good genetics to find the freaks. Found out quick that this is the right way to do things. I just *had* to come share this with you guys, I'm blown away. Sugar Cane is Slurricane X Platinum, grown in 5Gal DWC with Lotus nutes, Si, CalMag, FishShit, and Orca. This pheno was by far the slowest grower, smallest buds. I thought for sure it would be tossed in favor of the larger plants that were flowering faster. Now that I am in week 6 I can tell this is the clear winner. It still has the smallest buds, but is *insanely* frosty compared to the others. It's really greasy and smells like heaven. Look at it's sister in the background, that would have been my favorite in week 4. Now she is green while this prized pheno is practically lavender and white. *So *glad the clone of this pheno survived (#4 didn't). I will be growing this all winter now. Finally at the point where my homegrown is better than anything I can buy at my local dispensary, even the $500 oz stuff.

3DPrinting 4lan • 10 months ago • 93%

My K1 Max had a bed leveling error and printed for a while with the nozzle pressed into the bed so filament couldn't come out, causing a bad clog. I painstakingly stripped the machine down just to get access to the hot end, and the heatsink and heat break are **completely fused**. (yes I removed grub screw) The throat seems to be able to spin within the rest of the heat break, I don't think that's normal but I'm used to enders and cr10. What I've tried: - mini-torch on heat sink, then tried to pull hard out - Oven for 1hr at 200F - Freezer for 1 hour, THEN torch on heat sink - Heated the metal needle thing they provided, and stabbed that through the filament path - Tried to heat and remove the nozzle, but it is also completely stuck I reached out to Creality a week ago and they have not replied. The heat sink is not even available online, so I am dead in the water until they send me a new heatsink. Does anyone have any other ideas??? UPDATE!!! (for those who have this in the future) I finally got it! It took multiple cycles of putting it in my toaster oven at 450F for 20 minutes at a time. I was able to get the nozzle removed after a couple cycles, which gave me hope. I did two more cycles, trying to pull them apart each time. Finally it barely started to budge with lots of effort. I saw it was out about 0.5mm. I grabbed my torch and blasted that sucker right at the hole where the grub screw comes out from. Kept heating, pulling, heating pulling. Eventually it slid right out! Here's the crazy part. There was 0 filament residue in there when I got it out. I have no idea what was locking it in place. If it simply burned away there would have been carbon residue at least. Both the heat break and heat sink were clean... It's almost like they JB welded it in place lol I am so happy I wont be having to wait weeks for Creality to respond, then more weeks for them to ship a new heatsink. Going to use the spare hot-end that came with the printer and get this puppy printing again! Thanks again for the advice @dual_sport_dork

3DPrinting 4lan • 10 months ago • 96%

Hex key and mini clamp came in handy for battling a lifting edge

Here are the details: 2015 Kia Optima automatic 75k miles I was driving today and my car turned off out of the blue. A bunch of lights came on in the instrument cluster and I was able to coast to a safe spot. When trying to start the car there is a very short sound indicating it is trying to turn over, but maybe 1 second of this then silence. No clicking or whiring. My friend came and tried to jump start my car. Before attaching jumper cables I checked my battery voltage and it was 12.4V. After 15 minutes of charging my car would still not start. Even with the jumpers still attached from his battery. I went to AutoZone and borrowed their code reader, but it came up with 0 codes. I checked every fuse and they all appear fine. My thoughts are it could be the ignition coils or starter, but wanted to get another opinion before swapping things out. Any ideas? Thanks in advance! Edit: it turned out to be the engine has seized and it is being replaced for free under the recall. Got a 2023 Stinger as a loaner and very happy with how this turned out. Such a relief. I am considering selling my Optima and going Subaru or Toyota.

3DPrinting 4lan • 1 year ago • 76%

cross-posted from: https://lemmy.world/post/2804564 > First off, I just recently switched from a dual 1860 box mod and RTA to the XROS 3 and I am LOVING IT. No more half-pound chunk in my pocket, and it lasts all day on a charge. > > I always make myself accessories for new things I buy, and this vape is no exception. > > I designed this so I would not have to fiddle with a cable to charge my XROS 3 vape during the day, and had a place to store my extra pods. > > The dock utilizes the USB-C cable that comes included with the XROS 3 so that there are no cable-compatibility issues. It routes through a channel in the bottom and out the back of the dock. > > I added a window that allows you to view the charging LED light while docked. The dock will hold 4 of any of the pods they offer for the XROS series. > > This works with the following models: > > XROS > XROS 2 > XROS Mini > XROS 3 > XROS 3 Mini > > If you want to print one for yourself here is the STL file: https://www.printables.com/model/527431-xros-charging-dock-pod-storageFeel free to ask any print-related questions you may have and I'll help out.

First off, I just recently switched from a dual 1860 box mod and RTA to the XROS 3 and I am LOVING IT. No more half-pound chunk in my pocket, and it lasts all day on a charge. I always make myself accessories for new things I buy, and this vape is no exception. I designed this so I would not have to fiddle with a cable to charge my XROS 3 vape during the day, and had a place to store my extra pods. The dock utilizes the USB-C cable that comes included with the XROS 3 so that there are no cable-compatibility issues. It routes through a channel in the bottom and out the back of the dock. I added a window that allows you to view the charging LED light while docked. The dock will hold 4 of any of the pods they offer for the XROS series. This works with the following models: XROS XROS 2 XROS Mini XROS 3 XROS 3 Mini If you want to print one for yourself here is the STL file: https://www.printables.com/model/527431-xros-charging-dock-pod-storageFeel free to ask any print-related questions you may have and I'll help out.